Monday, April 28, 2014

10 WATT FM POWER AMPLIFIER


 http://www.seekic.com/uploadfile/ic-circuit/201164112622851.jpg
This power amplifier can extend 1-2W、88-108MHZ FM transmitter power to 10-15W.It uses single pipe c class amplifier and low-pass filter.It has higher conversion efficiency andstrong suppersion of considered wave. Principle Figure The circuit is showed as above.It adopts high-power transmitting tube C1972 and parameters are as follows:175MHZ,4A,25W,power gain ≥8.5db.As the pictures'parameters,the work center frequency is about 98MHZ.When the input radio-frequency power is about 2W,the rating output can reach 15W.The center frequency of former stage adjusts part of components to make sure that any frequency port among 88~108MHZ can reach rating value when it outputs.

1 comment: